Instant Kill

Instant Kill is an electrolyzed water technology that converts softened water into two distinctly different solutions in order to maximize sanitation while eliminating the need for toxic chemicals. Your carts come out of the cart wash ready for use, thus eliminating dwell time and the need for a cart holding area.

What is the active antimicrobial agent in Instant Kill?
The Instant Kill system uses two solutions that replace many cleaners:
  • Sanitizer – Hypochlorous acid, which is the same acid that the human immune system uses to kill pathogens throughout the body. It is a powerful antimicrobial that is effective against bacteria, viruses, yeast, and fungi.
  • Cleaner – Sodium Hydroxide, which is one of the best cleaners of its kind. It converts fats & oils into soap and washes them away, denatures proteins, and releases dirt and organic matter a layer at a time making it an excellent cleaning solution for equipment, tools, floors/carpets, and surfaces.
What is Instant Kill Ideal For?
Instant Kill is ideal for pathogen destruction, bio-film removal, degreasing, surface sanitization and more. Our Instant Kill solutions are produced on-site and on-demand for just pennies per gallon and are highly effective and safer for employees and the environment.
How is Instant Kill good for the environment?
  • Very low carbon footprint – no transportation and no container disposal.
  • No surfactants, anti-foaming agents, perfumes, or other additives.
  • Rapidly neutralized when recombined in the drain.
  • Saves water – less rinsing due to no residue left behind.
  • Saves energy – effective at ambient temperatures.
Technical Specifications
Cleaner
  • < 0.04% Sodium Hydroxide
  • pH > 11.5 with high alkalinity, but safer to humans and animals
  • Non-toxic, non-allergenic
  • No additives
  • No fumes
  • No foaming or streaking
  • Less costly than traditional chemicals
Sanitizer
  • < 0.02% Hypochlorous acid
  • pH 5.0 (+/-1)
  • 150-200ppm – free available chlorine
  • +1100 Oxidation-Reduction Potential (ORP)
  • 80x more effective than bleach at the same ppm
  • Lysis kill method
  • Fast acting
  • Less costly than traditional chemicals
Instant Kill System Utility Requirements
  • Clean, softened water
  • Less than 17.1 mg/l hardness (<1 gpg hardness)
  • Less than .3 mg/l iron
  • Temperature 10C to 33C or 50F to 90F
  • Standard electrical
  • 100-240 VAC/ 60Hz/single phase, 15 Amp minimum, GFCI required
  • 3/4″ drain minimum
  • Source for pelletized, pure 99.9% salt
Scroll to Top