What is the active antimicrobial agent in Instant Kill?
The Instant Kill system uses two solutions that replace many cleaners:
- Sanitizer – Hypochlorous acid, which is the same acid that the human immune system uses to kill pathogens throughout the body. It is a powerful antimicrobial that is effective against bacteria, viruses, yeast, and fungi.
- Cleaner – Sodium Hydroxide, which is one of the best cleaners of its kind. It converts fats & oils into soap and washes them away, denatures proteins, and releases dirt and organic matter a layer at a time making it an excellent cleaning solution for equipment, tools, floors/carpets, and surfaces.
What is Instant Kill Ideal For?
Instant Kill is ideal for pathogen destruction, bio-film removal, degreasing, surface sanitization and more. Our Instant Kill solutions are produced on-site and on-demand for just pennies per gallon and are highly effective and safer for employees and the environment.
How is Instant Kill good for the environment?
- Very low carbon footprint – no transportation and no container disposal.
- No surfactants, anti-foaming agents, perfumes, or other additives.
- Rapidly neutralized when recombined in the drain.
- Saves water – less rinsing due to no residue left behind.
- Saves energy – effective at ambient temperatures.
Technical Specifications
Cleaner
- < 0.04% Sodium Hydroxide
- pH > 11.5 with high alkalinity, but safer to humans and animals
- Non-toxic, non-allergenic
- No additives
- No fumes
- No foaming or streaking
- Less costly than traditional chemicals
Sanitizer
- < 0.02% Hypochlorous acid
- pH 5.0 (+/-1)
- 150-200ppm – free available chlorine
- +1100 Oxidation-Reduction Potential (ORP)
- 80x more effective than bleach at the same ppm
- Lysis kill method
- Fast acting
- Less costly than traditional chemicals
Instant Kill System Utility Requirements
- Clean, softened water
- Less than 17.1 mg/l hardness (<1 gpg hardness)
- Less than .3 mg/l iron
- Temperature 10C to 33C or 50F to 90F
- Standard electrical
- 100-240 VAC/ 60Hz/single phase, 15 Amp minimum, GFCI required
- 3/4″ drain minimum
- Source for pelletized, pure 99.9% salt
