Intelligent Movement

Tears and Stains

The Tears and Stains system counts and delivers linen found to be in unacceptable condition from the clean side of the plant directly to a station on the soiled side. While the linen is sent through the tube, the system counts the linen and can signal plant personnel when the receiving bin is full.

About Technical Info Accessories

About the Tears and Stains System
Automation Dynamics' Tears and Stains System allows plant operators to send torn or stained material directly back to the soiled section of the plant. The flawed material can be sent to and stored in nearly any container or sorting table. This process would greatly save time from the workers' trip to the dirty side of the plant.

Technical Specifications


  • 10 HP Motor
  • 208/230 Volt Full-Load Amps 32.2/28 (3 Phase)
  • 460 Volt Full-Load Amps 14 (3 Phase)

Control System:

  • 120 Volt/20 Amp


  • 0.2 CFPM at 100 PSI